Options for attaching a banner to the frame. Installation of the banner - technology. Price for the manufacture and installation of banners

1. Methods of mounting the banner on the facades of different types
2. Installation of a banner without making a frame
3. Price for the manufacture and installation of banners
4. Why installation of the banner is better to produce on frame structures
5. Banner mounting - technology

The main material for printing the banner is banner fabric (vinyl film on a mesh basis of polyester of various density), as well as a banner mesh.

When ordering a banner, first of all you need to decide where and for what it will be mounted, for how long and what image will be placed on it. From these parameters depends on the choice of a material, permissions for printing, the presence of eyelets, pockets.

One of the calls to use banners as a marketing and advertising tool is their versatility. Banners can be hung in many different situations, both for very early dates, and for long-term promotion both inside and outside. We have collected some tips and advice on how to hang a banner professionally in a variety of situations.

How to hang a banner on the fence. There are two simple options. Use cable ties or use elastic bungee. Cable ties are cheaper, but really meant for use only. How to hang a banner on the wall. For continuous use, there are aluminum paths that can be attached to the wall. The edge of the banner is completed with a trim that slides along the track. This is ideal if you intend to use banners as a regular advertising tool and often change the banner.

Outdoor banners should be able to withstand high wind gusts and changing weather conditions. Banner China or Europe? .. It does not matter if the installation was made incorrectly.

This article contains the basic options for mounting banners that you can do yourself with small banner sizes.

A cheaper but less flexible alternative is to screw the banner onto the wall using eye plates that are slightly larger than the holes in the eyelet on the banner. It is also durable, but obviously not so good when you need to change banners frequently.

For short-term use or when you need to change banners frequently or take them off at night, bolt hooks are a great way to achieve this. Just screw them into the wall, then attach your banner with elastic bungee. Ours come with adjustable elastic banjimi that make it easy to attach a banner. Banners are made a little smaller than the frame itself, so you can add a bit of stress to the banner.

Fixing the banner to the wall with dowels

It is very important that the wall on which the banner will be fixed does not have any sharp protrusions and obvious irregularities, otherwise under the influence of the wind, the canvas can easily tear.

The easiest way to install a banner is to mount it to a brick wall. Fastening is done with dowels. For the reliability of fasteners and to avoid tearing the banner, it is desirable to pre-install the grommets.

How to connect a banner to the post lamp. The only way to really attach a banner to a lamppost successfully is to invest in a personnel system. This keeps the banner tight and secure on a lamppost. After the banner frame is attached to the lamppost, the sign change is straight.

The temptation here is to attach the rope to the eyelets at the ends of the banner. Banners are not designed for this, instead the download should be distributed across the banner. The use of end lugs may work in the short term with very low wind or indoors, but a small gust and banner may break.

Photo: Fastening a banner for a cell phone repair salon to the wall with dowels .

Another option is mounting the banner to the wall. If the banner is attached to the wall with a cable or nylon rope, it should be well tightened, as much as possible by limiting the access of the wind from the back.

Methods of mounting the banner on the facades of different types

We found the most successful way to hang a banner across the street to use secure cables. Ideally, you have top and bottom cable. Using eyes on the banner, you hang a banner with cables with rings or hooks. A rope is attached to each of the end lugs in order to push the banner apart. A simpler, but less secure option is to simply use the top cable and use end lugs at the bottom of the banner. When a banner with a cross street is opened, it may be a good idea to have semicircular cuts cut into the circular avenue to reduce the wind load.

With the dew (rope) the edges of the canvas are strengthened. Eyelets are required for this type of attachment.

Photo: Fastening a banner for a grocery store to a wall with a cable.

To increase the strength of fasteners by installing:

Installation of a banner without making a frame

A simple way to hang a small banner from the ceiling is to use this clip on the top and bottom of the banner. For larger banners it is better to use a banner with welded pockets. In the top pocket you can use the hollow tubes through which you feed the rope to hang the banner. As an alternative, you can use a wooden dowel with drilled ends to take the hanger from both ends. The bottom pocket is used to take a weighted pole to keep the fan straight and easy to read.

1. grommets (holes, reinforced with a metal ring, for threading cables into it);

2. anchor bolt (fixed in the base for fasteners and holds the banner in place);

3. washers (used to prevent unscrewing parts and sealing joints).

Price for the manufacture and installation of banners

To hang a small printed banner from scaffolding, a good option is to buy a banner with welded pockets that slide across the fields of the scaffold. Banner by adjusting the distance between the poles. Large banners can be attached using eyelets with cable ties or elastic bungee. With the help of relay banners it is always recommended to consider the issue of reducing the effect of wind on the banner.

For better gliding, the surface of the glass should be moistened only with water and a few drops of detergent. You must use a commercially available spray bottle. Then remove the film from the substrate and gently place it on the glass surface. Water and air are covered with a scraper on the outside. A simple contact between the film and the smooth and clean glass surface is sufficient to achieve adhesion. What is special is that the film can be moved and reused as often as you want.

If the banner canvas will often change, it is better to mount it on a special frame. This will make it possible to make significantly fewer holes on the basis for fasteners (building façade, wall, etc.), thereby saving on redecorating if the banner is dismantled.

With the use of dowels, the banner canvas is easily nailed to the wooden frame.

To apply the glass finder, the glass surface is moistened with sufficient water and a small washing liquid, the sticker is removed from the substrate, it is applied to a damp surface, and the moisture under the film is removed as fully as possible. What does translucent mean? The film has a milky effect. How to glue the film on glass surfaces? Very simple: first clean the surface stuck with commercially available detergent. Then thoroughly wash the surface with water that has been cleaned with water, thoroughly clean the paper from the film and, if necessary, moisten the film.

Photo: Fastening a banner for a children's goods store on a wooden frame.

If canvas big size , then metallic frame will be most welcome. Fastening it will increase the tension of the banner, since the size of the frame for mounting is slightly larger than the size of the banner.

Why installation of the banner is better to produce on frame structures

Place the film on the water film and move it to the desired position. Now pour out the water and air inclusions to the sides. Further improvement in film adhesion. Check whether the substrate is clean, the film does not protrude or has not been placed at the edges so that air can penetrate. Check if the protective paper or backing paper has been removed. Try to reapply films with a large amount of water and then rinse thoroughly with water.

If the film still does not hold, contact us, we will be happy to assist you. As a rule, the flooring is simply laid. For use on large surfaces or when placing several sheets at the same time, use double-sided adhesive tape at the edges or. Our underflows can be sucked, swept or wiped with warm water and a mild detergent. Note that initial color deviations may occur. Yes, very simple with a ruler and cutter. The best way to scratch the surface of a floor tile is to break it in this area.

The frame is the most reliable and durable way to fasten the banner.

The banner is fixed on a metal frame using a cable or nylon rope. The cable is passed through the grommet and "wrapped" the frame.

Photo: Fastening a banner for a grocery store on a metal frame .

Scissors or cutter, ruler or meter, pen and plastic knife. The scraper is a hard rubber trowel and is available at a craft store or construction market. It should be smooth, without dust and grease; Untreated wood should be pre-treated with a primer. With a ruler and pen, any desired format can be printed on a backing paper and then cut; grid separation is useful. If you want accurate edge edges, always cut with an overlap of approximately 4 mm.

Banner mounting - technology

Finally cut the edges with a sharp knife. How to fasten several pieces of film together? If the surface to be glued is larger than the size of the film, a plurality of film pieces can be placed against each other. To do this, glue the separate parts together so that they overlap by approximately 10 mm in order to avoid areas that are subsequently exposed.

Mounting a banner on metal mesh fences and fences

When installing a banner on metal mesh fences and fences, it is best to use a nylon rope, passing it through the grommet and clinging to the metal fence. Nylon rope is made from a special material, resistant to water and various chemicals contained in the environment.

It is best to remove only a part of the substrate, put a film on it, and then press on the film with a squeegee or cloth from the center to the sides. If the foil has been applied incorrectly, it can be removed and corrected again. You will get the best results if you use a small square square wood covered with soft carpet. No problem, the foil can be thoroughly cleaned and re-glued - the full force of adhesion unfolds only after a few hours. Of course! To do this, heat the film with a hair dryer at the lowest level during processing, pull it into the desired shape and press.

Photo: Mounting a banner for dentistry on a metal fence.

Fastening a banner on the window

In the case of mounting the banner on a windy place or on the windows it is better to use a banner grid. When using such a material, the load on the fasteners and the banner itself will be much less, the banner itself will be easier, hence it will be easier to fasten it.

Photo: Fixing a banner for dentistry on the window.

Mounting the banner indoors

If the banner is planned to be placed indoors, it can be screwed with screws and washers, eyelets, dowels.

Weather conditions suitable for mounting the banner

The process of installing a banner on the street can be influenced by weather conditions. The lower the temperature outside, the banner fabric becomes harder and harder to fasten. Therefore, we advise to carry out the installation in calm weather and at a temperature not lower than -10 degrees Celsius. At lower temperatures, it is better to take out the banner immediately before fastening, so that the canvas does not have time to harden. Installation of the banner is not recommended in strong winds. It is worth considering: with a weak banner stretching in the winter, it can sag in summer, and, conversely, due to temperature fluctuations.

What you need to pay Special attention when installing the banner

The service life of printing on banner fabric

As for print quality, the image on the banner does not lose its brightness for about 1 year. The manufacturer gives exactly this term. After this period, the picture fades, the colors from the saturated turn into gentle soothing tones. Under various conditions, the brightness period of printing on a banner can vary from 1 to 3 years. It depends on the level of sunlight exposure, height and print resolution. A darker and lower place chosen for placing a banner, a higher print resolution is a guarantee of preserving the brightness of the image on the banner.

Question: How to hang a banner on the design?
Answer: Such a question is often asked in search engines on the Internet, more often they ask only which knit should be knitted for mounting a banner?
In principle, in the installation of banners there is nothing complicated and you can attach them to any convenient nodes, the main thing is that the banner hangs without folds and does not fly away with the first gust of wind.

Question: From what angle does the banner stretch?
Answer: From what angle does the banner stretch? such a question is asked by mount installers in Yandex and get on our site (information from statistics). I want to help people, because this secret is usually no one on the sites does not reveal, but usually the answer is passed from teacher to student. So usually the banner is pulled from the upper corners (this is more convenient) if the installation is done together. And if the installer is greedy or harmful (it works alone, which is wrong and not convenient), then it draws a banner from one top corner.

Question: Folds on the banner, how to get rid of?
Answer: The folds on the banner, who is to blame and how to get rid of them?
From ugly folds on the surface of the banner almost always you can get rid of. And this is the main task of installers to mount the banner without folds. Folds are formed due to the fact that the banner is not evenly stretched and there are distortions (it is weakened or, on the contrary, the corner or some edge of the banner is strongly drawn). Give a uniform tension over the entire plane of the banner is the main secret of the perfect installation of the banner. But there are objective moments that do not allow installers to hang a banner perfectly. This is the use of poor-quality material (not elastic), the size of the banner is greater than or equal to the design and there is simply no monitor for stretch, a flimsy design that deforms and does not allow the banner to stretch.

Question: How long does it take to install a banner?
Answer: The installation time of the banner directly depends on the size, location and method of attachment.
Installation of the banner usually takes a little time. More time is spent preparing. Correctly reel banner canvas. And you prepare for mounting fasteners, you hang workers and lifting ropes. If necessary, dismantled decorative elements.
Banner area of ​​up to one hundred square meters common format for points of sale and busy places, is mounted by a brigade of up to three people for an hour.
Larger banners ranging from two hundred to five hundred meters are usually mounted on the blank walls of residential or industrial buildings. A team of three to five people will perform a similar installation from three to seven hours.

Question: Which cord is better to use for mounting the banner?
Answer: Usually the installers choose the rope for fixing the banner, as they carry the installation warranty. Reliability and durability of connection of a design depends on a repshnur We choose a polyamide cord; it is strong enough and convenient for tying knots and tensioning the banner. The disadvantage of such a cord is its short lifespan, under the influence of ultraviolet rays, it loses its strength, and eventually collapses. But usually the life of the banner is much less.

Question: How much smaller should the banner be?
Answer: It all depends on the design and method of fastening. If the banner is stretched with a cord inside the structure, then the sides of the banner should be smaller than the sides of the structure by 10–20 cm.
If you are not sure about the size of the banner it is worth making measurements before ordering a banner print.